Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Miramar?
Spring replacement in Miramar typically costs $180 – $340 for one spring. Because springs wear in pairs, most jobs replace both at once, so a matched pair usually runs about twice that range. The written estimate you get before any work begins sets the final price.
A broken spring leaves the door heavy and unsafe to move. If yours has snapped, call (866) 937-7841 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A single torsion or extension spring replacement in Miramar runs about $180 – $340.
- A matched pair, which is what most homes need, costs roughly double that.
- Price depends on spring type, door weight, cycle rating, and whether cables or bearings are worn too.
- Estimates are free, and the written estimate sets the final price.
- Springs are under extreme tension. This is not a do-it-yourself job.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical Miramar job. All figures are estimated ranges for planning purposes.
| Line item | Typical estimated range |
|---|---|
| Single spring replacement (one torsion or extension spring) | $180 – $340 |
| Matched pair of springs (usually replaced together) | About twice the single-spring range |
| Cable repair, when a cable is frayed or off its drum | $130 – $250 |
| Roller replacement, when rollers are flat-spotted or noisy | $110 – $220 |
| Track realignment, when the door has shifted out of square | $120 – $240 |
| Opener repair, if the opener was strained by a broken spring | $120 – $320 |
| Full garage door repair visit, covering mixed issues | $150 – $600 |
What pushes a job toward the top of the range? Heavier doors need higher-cycle springs, which cost more than standard ones. A door with two torsion springs almost always gets both replaced, since a new spring paired with an old one wears unevenly. And when a snapped spring has been left hanging for a while, it often takes a cable or a bearing with it, which adds a line item or two.
What keeps a job at the low end? A single standard spring on a lighter door, with cables and drums still in good shape. That’s the simplest version of this repair, and it’s the one we see most often in Miramar’s single-family homes.
For a deeper look at the repair itself, see our guide to spring replacement.
What Affects Spring Replacement Pricing in Miramar
- Spring type and door weight. Torsion springs mounted on a shaft above the door and extension springs running along the tracks are priced differently. Heavier doors, including many of the wind-rated models common in South Florida homes, need springs rated for more cycles. That raises the part cost.
- One spring or two. Most modern doors use a matched pair. Replacing both at once costs about twice a single spring, but it’s the right call when both are the same age, because the second one is close behind the first.
- Cycle rating. Standard springs are rated for a set number of open-and-close cycles. Higher-cycle springs last longer and cost more up front. For a household that runs the door several times a day, the longer-life option often makes sense.
- Condition of cables, drums, and bearings. A spring failure can whip a cable loose or wear a bearing. If those parts are already tired, replacing them during the same visit saves a second service call later.
- Door height and configuration. A standard seven-foot door is the most common setup. An eight-foot door, or a door with a high-lift track, takes different springs and slightly more labor.
- Access and safety setup. A clean, clear garage makes the job straightforward. A garage packed with stored items under the door’s path takes longer to make safe before work can start.
Miramar’s climate plays a quieter role than most people expect. Heat and humidity work on the metal over time, and a garage that bakes in afternoon sun all year will dry out lubricant faster than a shaded one. Springs that run dry squeak, then bind, then fail earlier than they should. A little lubrication on the springs, rollers, and hinges goes a long way here.
How to Save on Spring Replacement
The single biggest cost saver is catching the problem before it cascades. A spring that’s stretching, squeaking, or leaving a gap in its coils is telling you something. Replacing it before it snaps usually means a simpler job with fewer add-on parts.
- Replace the pair together. It feels like spending more, but two springs of the same age fail close together. Doing both at once avoids paying for a second visit a few months down the road.
- Bundle worn parts into one visit. If your rollers are noisy or a cable looks frayed, have it handled while the technician is already there for the springs.
- Keep the door balanced and lubricated. A door that’s been running out of balance strains the springs every time it moves. Lubricating moving metal parts a couple of times a year is cheap insurance.
- Get the estimate in writing first. A written estimate tells you exactly what’s being replaced and why. Ours are free. Call (866) 937-7841 and we’ll walk you through it.
- Don’t wait for a snap. A snapped spring often means the door won’t open at all, and if it’s stuck open, your garage is exposed. Fixing it early keeps your options open.
Why Spring Work Isn’t a Do-It-Yourself Job
Torsion springs hold an enormous amount of stored energy. Releasing that energy the wrong way can cause serious injury, and the wrong spring size can damage the door, the opener, or both. This is one repair where the labor is worth every dollar. Our technicians have up to 9 years of experience, and spring repair is a core specialty for us, not a side job we squeeze in between other work.
If your door is stuck open right now, that’s a security concern, not something to leave until next week. We handle emergency garage door service for exactly those situations.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Miramar?
One spring typically runs $180 – $340 in Miramar. A matched pair, which is what most homes need, costs about twice that. The written estimate sets the final price. Call (866) 937-7841 for an exact quote, and estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repair is almost always cheaper than replacement, and for springs, “repair” means replacement anyway: a broken spring isn’t patched, it’s swapped for a new one. A full new door installation runs $700 – $2200, so replacing springs at $180 – $340 per spring is a fraction of that. Only a door with structural damage or a bent track usually justifies going further. Call (866) 937-7841 and we’ll tell you honestly which path makes sense for your door.
Can you replace my garage door springs the same day?
Yes, same-day spring replacement is often possible in Miramar. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and a call outside dispatch hours is booked into the next opening. Call (866) 937-7841 and we’ll get you scheduled.
Why does replacing both springs cost about twice as much as one?
Because it’s two springs, two parts, and the labor to tension both. Most residential doors use a matched pair, and when one breaks, the other is the same age and usually close behind. Replacing both at once typically costs about twice the single-spring range of $180 – $340, and it saves you a second service call later. Call (866) 937-7841 for a free estimate.
What brands of springs and openers do you work on?
We service springs on doors from Clopay, Amarr, Wayne Dalton, and Raynor, and we repair openers from LiftMaster, Chamberlain, Genie, and Craftsman. That means our technicians already know your system before they arrive. Call (866) 937-7841 with your door or opener brand and we’ll confirm the details.
Get Your Springs Fixed Right
A broken spring is one of the most common garage door failures, and it’s also one of the most dangerous to handle without training. Whether it’s a snapped torsion spring, a squealing extension spring, or a door that’s stuck halfway, Miramar Garage Door Repair Co can get it working safely. We work on your brand, from springs and cables to openers and panels, and one company handles the whole job. No handoffs, no subcontracting gaps.
Ready to get an exact price? Call (866) 937-7841 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Miramar market as of 2026. Miramar Garage Door Repair Co offers free estimates – call (866) 937-7841.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Carrie Quinn"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Rosa Salazar"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Rosa Martinez